Stationary IBC Mixer MSE-10000 ECO (Fixed 200 rpm, Value Tier)
The MSE-10000 ECO is the entry-level stationary IBC mixer in our stationary range. Same column and same wetted parts as the MSKE-10000 standard model: 1.5 kW electric motor, folding ∅350 mm 316Ti propeller through DN150 cap. What changes is the lift and the drive control: the ECO uses a hand-crank wire rope winch instead of the electric actuator. The ECO ships with a single fixed speed of 200 rpm — mechanical, no VFD, no operator panel memory, just a basic terminal box with start/stop and overload protection.
That single-speed configuration cuts the unit price by removing the integrated VFD and the operator panel. It pays for itself when the line runs the same recipe at the same speed on every batch — high-volume repetitive duty where nobody is going to change the rpm between runs. If the recipe does need different speeds at different steps, the standard MSKE-10000 with the integrated VFD is the right pick.
Where this mixer works
- High-volume household chemistry where every batch is the same recipe at the same speed (detergents, surfactants, fabric softeners).
- Single-product batch plants — one IBC, one recipe, one rpm, repeating across shifts.
- Water treatment and dosing — polymer flocculant, pH adjuster, dilution batches that do not need speed regulation.
- Resin and adhesive compounding on a single steady-state mixing curve.
- Operations where the cost difference between the ECO and the standard MSKE-10000 matters across a multi-station deployment.
Technical specifications
| Max. viscosity |
10,000 mPa*s (cP) |
| Drive |
electric 400 V three-phase |
| Motor power |
1.5 kW (~2 HP) |
| Motor type |
TEFC, IP55 |
| Speed |
single fixed 200 rpm — mechanical, no VFD, no regulation |
| Propeller |
folding ∅350 mm, 316Ti acid-resistant stainless steel (food contact EC 1935/2004) |
| Shaft |
stainless steel |
| Frame lift |
manual — hand-crank wire rope winch with automatic load brake and locking pawl, no electric actuator |
| Column material |
St3 painted steel standard — 304 stainless steel as paid option, then also with a stainless steel winch (price on inquiry) |
| Control |
basic terminal box — start/stop, overload protection (no VFD, no panel memory) |
| IBC compatibility |
600, 800 and 1000 L IBC totes with DN150 cap (Mauser, Schütz, Werit, Sotralentz, Ecobulk, Van Leer, Greif) |
| ATEX |
no — for stationary ATEX duty see MSRP-5000 ECO Ex |
| Lead time |
4–6 weeks |
How the ECO fits the stationary range
Pick the ECO when you have steady, repetitive batches and the integrated VFD on the standard MSKE-10000 is not earning its keep. Pick the MSKE-10000 when the recipe needs different speeds at different steps and the operator panel memory matters. Pick the MSU-1000 when you alternate between IBC totes and drums on the same station. Pick the MSRP-5000 ECO Ex when the medium is flammable and the zone is ATEX.
Related models
- MSKE-10000 — industrial standard sibling with integrated VFD (100–300 rpm continuous)
- MSU-1000 — universal stationary mixer with quick-change propellers for IBC and drums
- MSRP-5000 ECO Ex — pneumatic ATEX stationary mixer (Zone 1)
Full stationary line on the Stationary Mixers category page. For mobile IBC mixing see the IBC mixers range.
Product Comments