Pneumatic IBC mixer MKP-5000 for 1000 l IBCs – for plants with a compressed-air network (6–7 bar) and no electricity at the container. Stepless speed control by valve, folding ∅350 mm propeller in 316Ti stainless steel, up to 5,000 mPa·s. The standard version needs lubricated supply air; oil-free version at extra cost. Not ATEX – for hazardous areas choose the MKP-5000 Ex. Made in Poland.

The pneumatic ATEX IBC mixer for coating shops and ethanol-bearing chemistry. Two layers of safety stacked on top of each other: the air motor has no electric components by design, and the whole system carries full ATEX EX II 2GD h IIB T4 certification for Zone 1. If your hall has compressed air, this is usually the simpler ATEX solution than dealing with an Ex motor and certified cable runs.

Electric IBC mixer MKE-10000 Ex Full ATEX for 1000 l IBCs. The complete unit, including the control box, is ATEX certified: EX II 2GD h IIB T4, for gas and dust hazardous zones (1, 2, 21, 22). The control box can stand right next to the container. 1.5 kW motor, gearbox 140/200/280 rpm, 316Ti propeller, up to 10,000 mPa·s. For ethanol, solvent-based coatings and flammable resins. Made in Poland.

This is our bestseller in household chemistry. The MKE-10000 is the heaviest-duty non-ATEX electric IBC mixer we build — 1.5 kW (2 HP), 316Ti food-contact propeller, and a built-in overheating cut-out so you can run it continuously. One of our customers, a manufacturer of cattle feed substitutes, used to mix in 200 L drums for several hours a day. They moved to the MKE-10000 and now run a continuous batch line in 1000 L totes.

The middle-of-the-range electric IBC mixer — between the universal MKE-2000 and the heavy-duty MKE-10000. 1.1 kW (1.5 HP), 316Ti propeller, gearbox ratio chosen at order (140, 200 or 280 rpm), up to 5,000 mPa*s. Customers pick it for resins, adhesives and solvent-based coatings when ATEX is not required. It is also the model we recommend when the MKE-2000 is undersized but the MKE-10000 would be overkill (and pricier than needed).

Electric IBC mixer MKE-2000 for 1000 l IBCs – the best-selling model in the range, in our catalogue since 2013. 0.75 kW motor for 230 V or 400 V (chosen when ordering), gearbox with 140, 200 or 280 rpm. The folding 316Ti stainless steel propeller passes through the DN150 opening. For liquids up to 2,000 mPa·s. Made in Poland.