High-speed electric IBC mixer MKE-500 with a bridge that rests on the cage of a 1000 l IBC and has fork pockets for a forklift. Gearless direct drive, 0.75 kW, 900 rpm, double ∅140 mm impeller in 316Ti stainless steel. One unit fits both ∅150 and ∅225 mm openings. For dispersing liquids up to 500 mPa·s, such as paints and pigments. Made in Poland.

Compact electric IBC mixer MKZE-500 without a bridge – it mounts directly in the IBC screw cap. Gearless drive, 0.75 kW, 900 rpm, double ∅140 mm impeller. Choose a ∅150 or ∅225 mm opening when ordering. Lighter than the MKE-500, for liquids up to 500 mPa·s. Food-contact version in 316Ti stainless steel available at extra cost. Made in Poland.

Compact pneumatic IBC mixer MKZP-1000 without a bridge, mounted directly in the IBC screw cap. Runs on compressed air at 6–7 bar with stepless speed control by valve, double ∅140 mm impeller, ∅150 or ∅225 mm opening chosen when ordering. For liquids up to 1,000 mPa·s. The standard version needs lubricated supply air; oil-free version at extra cost. Not ATEX certified. Made in Poland.

Pneumatic IBC mixer MKP-5000 for 1000 l IBCs – for plants with a compressed-air network (6–7 bar) and no electricity at the container. Stepless speed control by valve, folding ∅350 mm propeller in 316Ti stainless steel, up to 5,000 mPa·s. The standard version needs lubricated supply air; oil-free version at extra cost. Not ATEX – for hazardous areas choose the MKP-5000 Ex. Made in Poland.

The pneumatic ATEX IBC mixer for coating shops and ethanol-bearing chemistry. Two layers of safety stacked on top of each other: the air motor has no electric components by design, and the whole system carries full ATEX EX II 2GD h IIB T4 certification for Zone 1. If your hall has compressed air, this is usually the simpler ATEX solution than dealing with an Ex motor and certified cable runs.